System Configuration By Web Console - Moxa Technologies MxNVR-IA8 User Manual

MxNVR-IA8

System Configuration by Web Console

System configuration can be done remotely with Internet Explorer. To access the server, type the system
configuration URL, http://<IP address of Video Server>/setup/config.html, to open the configuration
main page.
There are six configuration categories: System, Network, Video, Serial Port, Audio, and Alarm. A
description of each configuration item is shown in the following table:
Category
System
Network
Video Source
Schedule
Record
Alarm
Item
General
Accounts
Storage
Diagnosis
System Log
System Parameter
Firmware Upgrade
Factory Default
Reboot
General
SMTP Server
FTP Server
Accessible IP
HTTP Event Server
Modbus/ TCP
IEEE 802.1X
Video Source List
Weekly Schedule
System Alarm
Event Basic
Alarm
Schedule
Digital Input
Video Loss
CGI Event
Sequential
Snapshot
Description and Contents
Set Host Name, Date/Time
Manage Administrator and User account privileges
Configure and manage all storage devices
Self-diagnostic report with the status of the system,
communication, power, and LEDs
System Log and operation information
System parameter information and Import and Export functions
Remote firmware upgrade
Restore the factory default settings
Restart the system
The IP network settings of this VPort product
Set up the Primary and Secondary SMTP servers and e-mail
accounts
Set up the Primary and Secondary FTP servers
Set up a list of IP addresses that are granted access
Set up the HTTP Event Server to send the event alarm notification
Enable Modbus/TCP function
Configure IEEE 802.1X function
Edit and list video sources
Edit and list the weekly schedule
Configure network connection broken alarms
General event alarm settings
Set up the alarm schedule
Configure the digital input alarm
Configure the video loss alarm
Set up the CGI event alarm
Set up the sequential snapshot operation
4-2
System Configuration