Opening Your Browser - Moxa Technologies NPort 5200 Series User Manual

Opening Your Browser

1. Open your browser with the cookie function enabled. (To enable your browser for cookies,
right click on your desktop Internet Explorer icon, select Properties, click on the Security tab,
and then select the three Enable options as shown in the figure below.)
2. Type 192.168.127.254 in the Address input
box (use the correct IP address if different from the
default), and then press Enter.
3. Input the password if prompted. The password will
be transmitted with MD5 encryption over the
Ethernet.
Note that you will not be prompted to enter the
password if the NPort 5200 is not currently
password protected.
If you use other web browsers, remember to Enable the functions to "allow cookies that are stored
on your computer" or "allow per-session cookies."
NPort 5200 uses cookies only for "password" transmission.
Refer to Chapter 3, "Initial IP Address Configuration," to see how to configure the IP address.
Examples shown in this chapter use the Factory Default IP address (192.168.127.254).
5-2 NPort 5200 Series User's Manual