Network Settings - Moxa Technologies NPort 5200 Series User Manual

Time server
Setting
IP Address or Domain Name
(E.g., 192.168.1.1, time.stdtime.gov.tw, or
time.nist.gov)
NPort 5200 uses SNTP (RFC-1769) for auto time calibration.
Input the correct "Time server" IP address or domain name. Once NPort 5200 is configured with
the correct Time server address, NPort 5200 will request time information from the "Time server"
every 10 minutes.
Web/Telnet Console
The "Disable" option for "Web Console" and "Telnet Console" is included for security reasons. In
some cases, you may want to Disable one or both of these console utilities as an extra precaution
to prevent unauthorized users from accessing your NPort 5200. The factory default for both Web
console and Telnet console is Enable.
Setting
Enable or Disable
If you disable both the "Web console" and "Telnet console," you can still use Windows
Administrator to configure NPort 5200 either locally or remotely over the network. Refer to
Chapter 6 for more details.

Network Settings

You must assign a valid IP address to NPort 5200 before it will work in your network environment.
Your network system administrator should provide you with an IP address and related settings for
your network. The IP address must be unique within the network (otherwise, NPort 5200 will not
have a valid connection to the network). First time users can refer to Chapter 3, "Initial IP Address
Configuration," for more information.
Web Console Configuration
Factory Default
None
Factory Default
Enable
NPort 5200 Series User's Manual
Necessity
Optional
Necessity
Required
5-5