Moxa Technologies NPort 5200 Series User Manual page 60

Select Add Target.
When you select Add Target, you will see a NPort 5200
list that looks the same as when using Configuration
Broadcast Search. Check the NPort 5200 you would like
to Monitor, and then click OK.
The NPort 5200 list will now appear on
the Monitor screen.
Right click the panel and select
Settings.
Select or de-select Monitor Items.
Use the single arrowhead buttons to
move highlighted items from one
box to the other. Use the double
arrowhead buttons to move all items
in one box to the other.
Select a Refresh Rate (the default is 3 seconds).
6-10 NPort 5200 Series User's Manual