"Auto IP report protocol".
Auto report to IP
Setting
E.g., 192.168.1.1 or URL
(IP addresses of the form x.x.x.0 and
x.x.x.255 are invalid.)
Reports generated by the Auto report function will be automatically sent to this IP address.
Auto report to TCP port
Setting
E.g., 4001
Auto report period
Setting
Time interval (in seconds)
Serial Settings
Click on Serial Settings, located under Main Menu, to display serial port settings for ports 1 and
2.
To modify serial settings for a particular port, click on either Port 1 or Port 2 under Serial
Settings, located under Main Menu on the left side of the browser window.
5-8
NPort 5200 Series User's Manual
Factory Default
None
Factory Default
4002
Factory Default
10
Necessity
Optional
Necessity
Optional
Necessity
Optional