Udp Mode - Moxa Technologies NPort 5200 Series User Manual

Destination IP address 2/3/4
Setting
IP address or Domain Name
(E.g., 192.168.1.1)
Allows NPort 5200 to connect actively to the remote host whose IP address is set by this
parameter.
Up to 4 connections can be established between NPort 5200 and hosts. The connection speed or
throughput may be low if one of the four connections is slow, since the 1 slow connection will
slow down the other 3 connections.
The "Destination IP address" parameter can use both IP address and Domain Name. For some
applications, the user may need to send the data actively to the remote destination domain name.
TCP connect on
Setting
Start up,
Any character
Start up: Attempts to establish a TCP connection as soon as the NPort 5200 is powered on.
Any Character: Attempts to establish a TCP connection as soon as the NPort 5200 starts receiving
serial data.

UDP Mode

5-18 NPort 5200 Series User's Manual
Factory Default
None
Factory Default
None
Necessity
Required
Necessity
Optional