Configuring Nport 5200 - Moxa Technologies NPort 5200 Series User Manual

Configuring Windows Administrator
Unlock Fixed
The NPort 5200 is password protected, "Specify by IP address" was used to locate it, and the
password has been entered from within the current Administrator session. Henceforth during this
Administrator session, activating various utilities for this NPort 5200 will not require re-entering
the server password.

Configuring NPort 5200

Input the password to Unlock the
NPort 5200.
Right click on a specific NPort
5200 and select configure to start
the configuration.
The progress bar shows that Administrator is retrieving
configuration information from the specific NPort 5200.
Refer to Chapter 5 for each parameter's
function definition.
To modify the configuration, you must first
click in the modify box to activate the
parameter setting box.
You can simultaneously modify the configurations of multiple NPort 5200s that are of the same
model.
To select multiple NPort 5200s, hold down the Ctrl key when selecting additional NPort 5200s, or
hold down the Shift key to select a group of NPort 5200s.
NPort 5200 Series User's Manual 6-7