Multi-Screen Color Adjustment - Epson PowerLite Pro G5450WU User Manual

note
If you use two or more
projectors side-by-side,
exhaust from adjacent
projectors might cause
overheating. Leave at least
2 feet (60 centimeters) of
space between projectors.
Fine-Tuning the Projector
128
■
Multi-screen
Use this option if you want to color-match two or more projectors
that are being used to display images near each other, or you are
using the multi-screen feature to project from one source (one
image) with multiple projectors (see the EasyMP Network
Projection Operation Guide). You can make image adjustments at
each of five adjustment levels. First choose an
and then adjust the settings for each level:
adjust the brightness, and
between red and green, or blue and yellow. See the next section
for more information about multi-screen color adjustment.
■
Language
Select a language to use for the projector menus and messages.

Multi-screen Color Adjustment

You can match the color of projected images when two or more
projectors are being used to display images near each other, or when
you use the multi-screen feature to project from one source (one
image) as described in the EasyMP Network Projection Operation
Guide. For each screen, you can set five levels of brightness and color
correction.
1. Before starting, you may want to assign a numeric ID to each
projector. This lets you use the remote control to select the
projector you want to adjust. See page 71 for instructions.
To match the display colors as closely as possible, make sure that
all the projectors are set to the same color mode before starting.
See page 114 for instructions.
2. Press the button, highlight the
Menu
.
Enter
3. Select
Multi-screen
4. Start by setting the
Then use
Brightness Correct
the lighter one. Press
Brightness Correct
to adjust the balance
Color Correct
Extended
and press .
Enter
to
Adjustment Level
to match the darker projector to
to see the effects of your adjustments.
Enter
Adjustment Level
to
menu, and press
for two projectors.
1