Removing The Wireless 802.11G/B/A Module - Epson PowerLite Pro G5450WU User Manual

Removing the Wireless 802.11g/b/a
Module
Follow these steps to remove the module from your projector.
1. If you're running EasyMP Network Projection, click
on the control bar.
2. Check the access light to make sure it isn't flashing.
3. Turn off the projector and unplug it.
Disconnect
Click
Disconnect
Access light
caution
Never remove the module
while its access light is green
or when projecting
wirelessly. You may damage
the module.
Using the Projector on a Network
97