Epson PowerLite Pro G5450WU User Manual page 92

note
Text input for WEP
encryption varies with
different access points; check
with your network
administrator. Try
ASCII
first. If that doesn't work,
try and then
Text2 Text3
Using the Projector on a Network
92
Highlight the
Key ID you selected, then press
button to select individual letters, then press
character. To navigate backward and forward through the input
text, highlight the arrows and press
settings or capital letters, highlight the option and press
When you're done, highlight
.
8. Check with your network administrator for directions on entering
a key for your network, and follow these general guidelines:
■ For 128 bit WEP encryption with hexadecimal input, enter
26 characters, from 0 to 9 and from A to F.
■ For 64 bit WEP encryption with hexadecimal input, enter 10
characters, from 0 to 9 and from A to F.
■ For 128 bit WEP encryption with ASCII or text input, enter
13 alphanumeric characters.
■ For 64 bit WEP encryption with ASCII or text input, enter 5
alphanumeric characters.
9. When you're done making these settings, select
, and then
complete
changes.
10. Press
Menu
text box that corresponds to the
Encryption key
Enter
Finish
to confirm that you want to save the
Yes
to exit.
. Press the pointer
to input a
Enter
. To toggle symbol
Enter
Enter
and press .
Enter
,
Return Setup
.