Configuring A Wireless Connection - Epson PowerLite Pro G5450WU User Manual

5. If you want to create a password for using PJLink to control the
projector, highlight
password of up to 8 alphanumeric characters. When you're done,
highlight and press
Finish
6. If you want to create a password for remote access to the
projector, highlight
enter a password of up to 8 alphanumeric characters. When you're
done, highlight
Finish
7. If you want to set up a security keyword so that only people who
are in the same room as the projector can access it, set the
Projector keyword
connect to the projector, it displays a randomized four-digit
number or "keyword" on the screen. If you're using EasyMP
Network Projection, you can enter the keyword on your
computer to connect (see the EasyMP Network Projection
Operation Guide for details).
8. When you're done making these settings, highlight the
button at the top of the screen, then press
and press
Complete
save your settings.
9. Press to exit.
Menu

Configuring a Wireless Connection

After you install the optional Wireless 802.11g/b/a Module, you can
use the EasyMP Network Projection software to connect to the
projector and send images wirelessly in two modes: Ad Hoc mode or
Access Point mode.
■ Ad Hoc mode (computer-to-computer mode) lets you connect
just one computer to the projector at a time; it's easy to set up,
and the only equipment you need is a computer with a wireless
(802.11g, 802.11b, or 802.11a) network card or adapter, or a
Macintosh with an AirPort
connect with this mode, any connection to other wireless
networks is broken; you can connect to the projector only.
, press
PJLink Password
.
Enter
Web Control Password
and press .
Enter
option to . Then when you want to
On
Enter
, then choose
Enter Yes
®
or AirPort Extreme card. When you
, and enter a
Enter
, press , and
Enter
Return
. Choose
and press to
Enter
Using the Projector on a Network
note
You can interrupt projection
even when a keyword is
used. Press the button
Esc
on the remote control and
select the option.
Close
note
Make sure you've installed
the EasyMP Network
Projection software as
described in the EasyMP
Network Projection
Operation Guide.
To connect to the projector
over a wireless network, your
computer must be running
Windows 7, Windows
Vista, Windows XP, or
Windows 2000. Your Mac
must be running Mac OS X
10.3 to 10.6.
Access Point mode
(infrastructure mode) is
required to achieve transfer
speeds up to 54MB/sec on an
802.11g network. Ad Hoc
mode (computer-to-
computer mode) limits
network connections to
11MB/sec. This is a
standard specification of
802.11g networking.
81