Playing Sound Through The Projector - Epson PowerLite Pro G5450WU User Manual

note
If you have equipment
connected to the port,
LAN
in most cases you do not
need to connect an
additional cable for sound.
You can, however, connect
an audio cable to the
, , or
Audio1 Audio2
port (as described
Audio3
in this section) and output
the sound by adjusting the
setting. With
Audio Input
the PowerLite G5550NL/
G5650WNL/G5950NL,
you can also adjust this
setting for equipment
connected to the HDMI
port. See page 119.
If you are using a
DVI/HDMI conversion
cable to connect your
DVI-D source through the
port on the
HDMI
PowerLite G5550NL/
G5650WNL/G5950NL,
you will need to connect an
additional audio cable and
adjust the
Audio Input
setting as described above.
Setting Up the Projector
46

Playing Sound Through the Projector

You can play sound through the projector's speaker system or attach
an external speaker system.
To play sound through the projector, follow these steps:
1. Locate the appropriate cable and connect it to the appropriate
jack on the projector, as described below.
If you have equipment connected to the
■
use a stereo mini-jack cable. Connect the cable to the
port.
■ If you have equipment connected to the
(G5550NL/G5650WNL/G5950NL only), use a stereo
mini-jack cable. Connect the cable to the
port,
Computer1
Audio1
port
Computer2
port.
Audio2