Using Quick Wireless Connection - Epson PowerLite Pro G5450WU User Manual

If you have the optional USB key, you can use Quick Wireless
connection as described in the next section. Or, you can configure
your connection manually as described on page 80.

Using Quick Wireless Connection

Using the optional USB key, you can quickly connect the projector to
a Windows computer wirelessly without any configuration.
First, make sure you have installed the optional wireless module as
described on page 78 and turned on the projector.
1. Connect the USB key to the projector's
2. When you see a projected message that the network information
update is complete, remove the USB key.
3. Connect the USB key to a USB port on your computer or
notebook.
In Windows 7 or Windows Vista, if you see the AutoPlay
window, select
Run LaunchQW.exe
Account Control screen, click
4. Follow the instructions on the screen to install the Quick Wireless
Connection driver.
If you see a Windows Firewall message, click
firewall.
After a few minutes, your computer image will be displayed
through the projector. If not, try restarting your computer.
5. When you're done with your presentation, remove the USB key.
You may need to restart your computer to reactivate your wireless
interface.
USB port.
. When you see the User
.
Allow
to disable the
Yes
note
Do not attempt to write to
the USB key or use it as a
flash memory drive.
note
The Quick Wireless
Connection utility will
disable any other wireless
sessions and adapter
programs. Make sure you
leave the USB key in your
computer for your entire
Quick Wireless Connection
session.
Using the Projector on a Network
79