lets you zoom in on a part of
E-Zoom
your image.
Basic settings
brightness, keystone angle, contrast, and
color mode.
Switch video source
between the Video and S-Video ports.
Switch PC source
between your computer and EasyMP.
7. When done with your presentation, click
control bar.
Switching Between Users
To connect to the projector while another person is already using it
(Access Point mode only), you follow the same basic steps as described
in the previous section.
1. Open
EMP NS Connection
You see this screen:
2. Select the projector and click
lets you change the
lets you switch
lets you switch
Disconnect
.
.
Connect
on the
Select projector
Presenting Through a Wireless Network
45