Epson PowerLite 735c User Manual page 110

Status lights
Light Status
flashing orange
red
Solving Problems
104
Description
The projector is too hot. Make sure the temperature surrounding the
projector does not exceed 95
around and under the projector for ventilation.
The air filter may be clogged. Clean or replace it as described on page 95.
The projector is overheating, which turns the lamp off automatically. Wait
until the cooling fan stops, then unplug the power cord. Plug the power
cord back in and press the
temperature is not above 95 °F (35 °C) and there is plenty of space
around and under the projector for ventilation.
The air filter may be clogged. Clean or replace it as described on page 95.
If the projector continues to overheat after you clean the air filter, the
problem may be caused by damage to the cooling fan or temperature
sensor. Contact EPSON for help.
Warning: Except as specifically explained in this User's Guide, do not
attempt to service this product yourself.
The power light is flashing orange and you cannot turn
on the projector.
The lamp is cooling down. Wait until the light turns off and then
press the button to turn on the projector.
Power
The power light does not come on.
Make sure the power cord is connected securely both at the power
outlet and the projector. If you have just replaced the lamp, make sure
the cover is securely fastened.
° °
F (35 C) and there is plenty of space
Power
button. Make sure the room