Epson PowerLite 735c User Manual page 19

To remove a card that's already in the projector, follow these
guidelines:
For the 802.11b card, simply pull it straight out of the card slot.
For a memory card, push in on the eject button so the button
extends out (if it's not already). Then push it a second time to
eject the card.
Push button to
eject card
Using Component Video
If you want to project using component video, make sure your video
equipment is properly connected to the Computer/Component Video
port as described on page 48. Then follow these steps:
1. First switch the source to
button on the projector or the
remote control.
2. Then change the
Input Signal
or
YPbPr Component Video
Pressing the
Comp/EasyMP
button on the projector) then lets you switch to Component
Source
Video—instead of Computer—as the input signal.
Card slot
, using either the
Computer
button on the
Comp/EasyMP
in the Video menu to the
setting (see page 77).
button on the remote control (or the
note
You don't have to turn off
the projector before inserting
or ejecting cards.
Source
YCbCr
Displaying and Adjusting the Image
13