What To Do When The Lights Flash - Epson PowerLite 735c User Manual

What To Do When the Lights Flash

The lights on top of the projector indicate the projector's status and
let you know when a problem occurs.
Power light
If the projector is not working correctly, first turn it off, let it cool,
and unplug it. Then plug the power cord back in and turn on the
projector. If this does not solve the problem, check the status lights on
top of the projector and try the solutions recommended on the
following pages.
Refer to the following table for a complete description of the
projector's status lights and their meaning:
Status lights
Light Status
orange
flashing green
green
flashing orange
flashing red
(half-second
intervals)
flashing red
(1-second
intervals)
Lamp/temperature light
Description
The projector is in sleep mode. You can unplug it or press the Power
button to turn it on.
The projector is warming up. Wait for the image to appear.
The projector is operating normally.
The projector is cooling down. You can't turn it back on (and you should
not unplug it) until the light stops flashing and remains orange.
The lamp may be burned out. First make sure the lamp cover is securely
installed. If that's not the problem, remove the lamp and replace it as
described on page 96.
Power is cut off because of an internal problem. Remove the power cord
and contact EPSON for help.
Solving Problems
103