Epson PowerLite 735c User Manual page 69

Before you start, make sure you are set up to access the card in your
computer's PCMCIA slot or card reader. Be sure to use the transfer
process described below to ensure that the scenario plays properly:
1. From the Scenario Option menu, choose
see a drive selection window:
2. Choose the drive where your card is located, then click
3. Click again to confirm. Your scenario is transferred to the
OK
card.
Once the scenario is transferred, you see this message about your
scenario's autorun setting:
The autorun setting means that the scenario will start playing
whenever the projector is turned on (with the memory card in the
projector).
4. Do one of the following:
If you don't want the scenario to run automatically, click
. Skip to step 8 to remove the card and insert it in the
Cancel
projector.
If you want it to run automatically, click
with the following instructions.
. You
Send Scenario
Select your memory
card drive
.
OK
and continue
OK
Presenting from a Memory Card
note
You have to save the
scenario on your computer's
hard drive before
transferring it. Don't use
Windows to copy the
scenario to your memory
card, or it may not play
properly.
63