Presenting Through A Wireless Network - Epson PowerLite 735c User Manual

note
For international users,
please observe any local
regulations concerning the
use of wireless technology.
Presenting Through a
Wireless Network
T
his chapter tells you how to send pictures to the projector through
a wireless network. Using EMP NS Connection, you can project
images shown on your computer screen—including text and
graphics—directly to your audience. Because images are displayed in
real-time, any changes you make on your PC or laptop are
automatically mirrored on the screen.
You'll find instructions in this chapter on:
Starting EasyMP
Connecting to the projector in Ad Hoc mode or Access Point
(infrastructure) mode
Running the EMP NS Connection software
Before starting, make sure you've installed EMP NS Connection as
described in Appendix A or on the Quick Setup sheet for each
computer you want to be able to connect to the projector. Then
follow the steps in this chapter to start EasyMP, configure your
projector and computer, and run EMP NS Connection.

Presenting Through a Wireless Network

1l
27