Epson PowerLite 735c User Manual page 97

If you've installed the EMP NS Connection software, open
it and connect to the projector you want to monitor. Then
click on the control bar that appears on the screen.
The projector's web screen opens in the browser window, as
shown below:
Main
menus
2. Select one of the main menu options listed on the left, then
change any settings as needed in the main part of the screen.
These settings correspond to those found in the projector's menu
system; for details, see Chapter 6.
Various buttons are also provided at the bottom of the screen,
matching those found on the remote control (see page 24).
Functions corresponding
to remote control buttons
Click here
to open
browser
Remotely Monitoring the Projector
91