Problem Solving; What To Do When The Lights Come On Or Flash - Epson PowerLite Home Cinema 3020plus User Manual

Problem Solving

This section explains how to interpret the projector's status lights, solve problems with the
picture and remote control, and contact technical support.
What To Do When the Lights Come On
or Flash
The lights on top of the projector and 3D glasses indicate the projector's status and let you
know when a problem occurs.
If the projector isn't working correctly, first press the P power button, let the projector cool
down, and unplug the power cord. Then plug the power cord back in and turn on the
projector. If this doesn't solve the problem, check the status lights on top of the projector.
Note: If the
Illumination setting (see page 53).
Lights indicating normal operation
Light state
All lights are off
Power button is on,
power light is off
66
Problem Solving
power button and light don't come on, they may have been turned off using the
Cause and solution
The projector is turned off. If necessary, connect the power cord.
The projector is in standby mode. Press the
the projector or the On button on the remote control to turn it on.
P
power button on