User's Guide Update
Please note the following changes to your projector's operation and the information in the
PowerLite 1705c/1715c User's Guide.
New Version of Projector Software
Your projector now comes with version 2.30 of the EMP NS Connection software, which lets you
project through a wireless network and display from a digital camera or external drive. It works
virtually the same as version 2.0 (described in your User's Guide), but some of the screens may look
slightly different. Also, note that when you are using EasyMP to display images or movies,
sometimes you'll need to press
and sometimes you'll need to press
(and select an option)
to open a folder, view an image/movie, or start a slideshow—depending on whether you are in
Guide Mode or Quick Mode.
Be sure to install the new Version 2.30 of EMP NS Connection from the projector software
CD-ROM that came with your projector. If you are using an older version, you must uninstall it
first and then install version 2.30. The steps for installing the software in Windows
different than described on page 172 of your User's Guide. Follow the instructions below instead.
Installing the Software in Windows
1. Insert the Projector Software CD-ROM in your computer's CD-ROM or DVD drive.
The program starts and you see this screen: