Epson PowerLite 1716 User Manual page 70

Setting Up Network Projection
70
12. Click the
Wireless Networks
(If you don't see this tab, you may need to enable your wireless
card or adapter by clicking
settings; then follow any instructions on the screen to enable the
device.) You see a screen like this:
13. Verify that you've enabled your computer's connection to the
access point. It should be listed with the small
indicating a connection.
If it's not listed, click
point.
14. When you're done making settings, click
box.
Now you're ready to connect to the projector. See the EasyMP
Operation Guide for details.
tab.
to access the device
Configure
and type the name of your access
Configure
OK
icon next to it,
to close the dialog