Epson PowerLite 1716 User Manual page 42

note
Next time you connect via
USB, you won't have to
wait for the software to
install.
Connecting to Computers, Cameras, and Other Equipment
42
5. Connect the square end of the cable to the projector's
(square) USB port.
6. Connect the flat end of the cable to any available USB port on
your notebook or desktop computer.
Messages appear as the projector is recognized and the software
installation begins.
7. Follow the instructions on your computer screen to install the
Epson USB Display software. If you see a "Digital Signature
Warning," select
Continue
software the first time you connect.
8. After the software has installed, press the
remote control. "Easy MP" appears briefly in the upper right
corner of the image and you see your computer's desktop
displayed by the projector.
USB cable
. You will only need to install the
Type B
button on the
EasyMP