Epson PowerLite 1716 User Manual page 129

You've connected a computer and see a blue screen with the
message displayed.
No Signal
Make sure the cables are connected correctly, as described on
■
page 40.
If you've connected a computer and one or more video sources,
■
you may need to press the
projector or one of the source buttons on the remote control to
select the correct source. Allow a few seconds for the projector to
sync up after pressing the button.
If you're using a PC notebook:
Hold down the
■
Fn
key that lets you display on an external monitor. It may have an
icon such as
seconds for the projector to sync up after pressing it. Check your
notebook's manual or online help for details.
On most systems, the
screen and the projector, or display on both at the same time.
■ Depending on your computer's video card, you might need to use
the Display utility in the Control Panel to make sure that both the
LCD screen and external monitor port are enabled. See your
computer's documentation or online help for details.
If you're using Mac OS X:
1. Open
System Preferences
2. Click or
Display Displays
3. Click
Detect Displays
4. Make sure the
VGA Display
5. Click the
Arrangement
6. Make sure the
Mirror Displays
Source Search
key on the keyboard and press the function
, or it may be labelled
CRT/LCD
key lets you toggle between the LCD
.
.
.
or
Color LCD
or tab.
Arrange
checkbox is selected.
button on the
. Allow a few
dialog box is selected.
Solving Problems
129