Adjusting The Aspect Ratio - Epson PowerLite 1716 User Manual

note
If part of the image remains
cut off, check the projector's
Resolution setting (see
page 103). Select Normal or
Wide, depending on the size
of your computer's display
panel.
Using the Remote Control
32

Adjusting the Aspect Ratio

You can use the
Aspect
an image fits into the display area. Each time you press the button, the
projector changes to the next setting.
When Connected to Video Equipment
If you're projecting from video equipment such as a DVD player, set
the projector's
Aspect
example, if the video player is set to output images at a 16:9 aspect
ratio, set the projector's
player outputs images at a 4:3 aspect ratio, select
4:3 setting
Note that the projector's native aspect ratio (XGA) is narrower than
16:9. Therefore, widescreen movies and HDTV broadcasts will
display with black bars at the top and bottom when
the setting.
Aspect
When Connected to a Computer
For computer images,
This displays the image at the largest possible size without stretching
it.
Depending on your computer display, you may see black bars at the
edges. In that case, try selecting
button on the remote control to adjust how
setting to match that of the player. For
setting to
Aspect 16:9
16:9 setting
is usually the best setting to select.
Normal
or .
4:3 16:9
so they match. If the
.
4:3
is selected as
16:9