Epson PowerLite 1716 User Manual page 65

Highlight the
SSID
Use the buttons to select individual letters; then press
to input a character. To add a blank space or to navigate backward
and forward through the input text, highlight the arrows and
press . To toggle symbol settings or capital letters, highlight
Enter
the option and press
and press .
Enter
Note that the SSID is case-sensitive (if you enter the name in
uppercase on the projector, you must type it the same way on the
computer connecting to the projector).
7. If your access point assigns IP addresses automatically, turn on
. Otherwise, turn off DHCP and enter the following
DHCP
information:
: Enter the IP address you want to assign to the
■
IP address
projector. It must be formatted like other addresses on the
network. The last 3 digits should be unique.
■
Subnet mask
depends on how your network is set up.
■ Gateway address
the access point or AirPort base station when it was set up.
8. If you want to prevent the SSID from being displayed on the
standby screen, set the
9. To prevent the IP address from appearing on the standby screen,
set the
IP Address Display
10. When you're done making these settings, highlight the
button at the top of the screen, then press
and press
Complete
save your settings.
text box, press , and enter a name:
Enter
. When you're done, highlight
Enter
: For example: 255.255.255.000, but this
: Enter the IP address that was assigned to
option to
SSID Display
setting to
Off
, then choose
Enter Yes
Enter
Finish
.
Off
.
Return
. Choose
Enter Setup
and press to
Enter
Setting Up Network Projection
note
For specific details about
your network, please consult
your network administrator.
If you don't know your
gateway or access point
address, see page 71. If
you're using AirPort, start
the AirPort Admin utility,
select your base station and
click Configure. Then click
the Network tab to see your
base station's IP address.
65