Additional Components
Depending on how you plan to use the projector, you may need
additional components:
To receive an S-video signal, you'll need an S-video cable. One
■
may be provided with your video equipment, or you can purchase
one from Epson; see page 12.
To receive a component video signal from a VCR or other video
■
device, you'll need a component-to-VGA video cable. You can
purchase one from Epson; see page 12.
To use the projector wirelessly, you'll need to install the optional
■
wireless module, available from Epson; see page 12.
If you want to connect the projector to your wired network and
■
configure it with an IP address, you'll need to install the optional
wired LAN module, available from Epson; see page 12.
■
For a quick wireless connection that requires no configuration,
you can purchase the optional USB key from Epson; see page 12.
Welcome
11