Epson PowerLite 1716 User Manual page 133

The image is too light or dark, or colors are incorrect.
■ Press the
Color Mode
page 33).
Try adjusting the brightness and color settings in the Image menu
■
(see page 100).
Try changing the
■ Brightness Control
page 104).
For fine-art presentations, use the six-axis color adjustment as
■
described on page 101 for precise control of the hue and
saturation.
■ Check your computer display settings to correct the color balance.
The projector's lamp may need to be replaced. See page 118 for
■
instructions.
There is no sound, or the sound is not loud enough.
■ Press the button on the projector or remote control to increase
the volume.
Make sure
■ A/V Mute
the remote control may have been pressed.)
Make sure the A/V Mute slide is open.
■
■ Try adjusting the
Volume
page 104).
■ If you're using a DVD player or VCR or other video source, make
sure the volume is not turned all the way down or muted. Also,
make sure the cables are connected correctly, as described on
page 50.
■ Make sure the audio cable is connected securely at both ends. For
computer audio, connect the cable to your computer's
headphone jack or
Make sure the volume control on your computer is not turned all
■
the way down or muted. In Windows, you may be able to use the
volume control in your Windows system tray (lower right corner
button to select a different color mode (see
in the Settings menu (see
is not enabled. (The
A/V Mute
setting in the Setting menu (see
audio out jack.
note
Because of the different
technologies used, your
projected image may not
exactly match the colors on
your notebook or computer
monitor.
button on
Solving Problems
133