Chapter 3
Preparing to install the R2MFC MBM
This chapter provides an overview of the preparation required to install the R2MFC MBM in a
host system. (The host system is the BCM system to which the R2MFC MBM connects.)
The information in this chapter is based on the following assumptions:
•
The host system is installed, initialized, and tested.
•
The installer has a working knowledge of the host system and an understanding of
telecommunications.
This chapter contains the following information:
•
"Installation process map" on page 28
•
"Host system setup requirements" on page 28
•
"R2MFC MBM setup requirements" on page 29
•
"Customer supplied hardware requirements" on page 30
R2MFC Media Bay Module Installation and Configuration Guide
27