4.3.7
Rack Requirements
Telco Rack
Space
4.4
Interfacing with the IP Networks
To ensure full high availability capabilities, one of methods detailed below must be
incorporated into the network infrastructure.
4.4.1
Method One: Cluster of Two Interconnected L-2 Switches
In a configuration with the cluster of two interconnected L-2 switches, the Media Gateway
3500's uplink is connected directly to L-2 switches. The two Ethernet Switch boards must
not be interconnected externally as this, combined with the intercommunication between
the L-2 switches, causes a closed loop in the network.
Installation, Operation, Maintenance Manual
Table 4-15: Rack Requirements
19-inch
As per GR-63-CORE
Maintenance access 762 mm (2' 6")
Wiring access 610 mm (2')
Figure 4-1: Clustering of Two L-2 Switches
HA Router / Clustering
L2 Switch
Communication
Active Ethernet Switch
Board
Media
Gateway
Boards
WAN
L2 Switch
Between
1 GbE
Standby Ethernet Switch
F-Link
Board
SC Boards
58
Media Gateway 3500
Document # LTRT-90704