Performance Monitoring - Nortel Media Gateway 3500 Installation, Operation And Maintenance Manual

For instructions on configuring the Media Gateway, refer to the EMS User's manual
section, Configuring the Media Gateway 3500 Media Gateway. Follow the steps for
adding/removing, locking/unlocking and provisioning a Media Gateway.
Refer to EMS User's manual section, Monitoring Status Panes.
For configuring a newly inserted Media Gateway board, refer to EMS User's manual
section, Media Gateway Level Status Pane.
For modifying an Media Gateway board Configuration, refer to EMS User's manual
section, TP Board-Level Provisioning Navigation Buttons.
For modifying a Trunk Configuration, refer to EMS User's manual section, TP Board-
Level Provisioning Navigation Buttons.
Note 1:
Note 2:
For setting Redundancy parameters, refer to EMS User's manual section, TP/ Board-
Level Provisioning Navigation Buttons regarding Button 4 "Redundancy Group
Properties". Refer to the table, TP-1610 Configuration - Limitations and Work-Around
Issues.
For setting Clock parameters, refer to EMS User's manual section, TP Board-Level
Provisioning Navigation Buttons regarding Button 5 Clock Properties.
12.3

Performance Monitoring

The EMS offers two view types of Performance Monitoring:
Real-Time View
Historic View
For more details, refer to the Performance Monitoring section in Element Management
System User's Manual, Document #: LTRT-910xx.
Installation, Operation, Maintenance Manual
A combination of T1 and E1 trunks is not allowed in the same Media
Gateway board.
Although the protocol type of a trunk is an on-line parameter, moving from
T1 to E1 cannot be performed in an on-line fashion. Instead perform a
Lock/Unlock on the Media Gateway board to move from T1s to E1s and
vice versa.
110
Media Gateway 3500
Document # LTRT-90704