Left-Hand Handlebar Switch - KYMCO Dink-R125 Manual

Left handlebar switch
Turn signal switch
Push signal to other drivers for an intention to
make a turn or change a lane. The turn signal
light is blinking while the switch is pushed left
or right.
Use this position for left turn.
Use this position for right turn.
To release Turn signal, just press-in the
button
Horn button :
2
Press the horn button to sound the horn.
Dimmer switch
3
Switch to select the light with high or low beam.
for low beam.
for high beam.
Passing button 4
Press this button to flash the headlight with
high beam to signal other drivers ahead for an
intention to overtake.
CONTROLS & FEATURES
1 :
:
:
NOTE: Turn signal switch will not release
automatically, it requires resuming after use.
Forgetting to resume it may result in traffic safety
issues.
4
2 1 3
35