Break-In - KYMCO Dink-R125 Manual

Break-in

The first 1600km (1000 miles) of riding is very
important to the life of usage. Proper break-in
operation during this period will help ensure
maximum life and performance.
The reliability and performance depend on a
special care and limited operation during the
break-in period.
The following limitations should be complied
during the break-in period:
Initial 800km (500 miles):
Less than 1/2 throttle or not over
Up to 1600km (1000 miles):
Less than 3/4 throttle
Vary the engine speed
The engine speed should be varied and not
held constantly for a long time and also
prohibited to have heavy load during the
break-in period.
OPERATION
Avoid constant low speed
Operate the engine at constant low speed
even of light load may cause the running part a
fit-in problem. Be sure to start up the engine
gently during the break-in period.
Avoid full throttle operation
Operate the engine at high speed may cause
running part a lubrication problem. Be sure to
keep in the limited speed range during the
break-in period.
The 1000km (600 miles) initial service is
very important to ensure an optimum
vehicle condition in the future.
WARNING
39