KYMCO Dink-R125 Manual page 66

Table of Contents

Advertisement

Coolant replacement
The coolant should be replaced by an
authorized KYMCO dealer.
NOTE:
Always notice coolant level in the
reserve tank. Do not attempt to add coolant by
removing the radiator cap.
Coolant recommendation
Use the proper type and amount of
coolant. The coolant must be in good
condition and have the proper ratio of anti-
freeze and distilled water to prevent
freezing, overheating, and corrosion.
Use only high quality ethylene glycol anti-
freeze that contains corrosion protection
inhibitors and the formula is for aluminum
alloy engines.
(See the label on the container)
A 50:50 solution of anti-freeze and distilled
water is required. It's for most operating
temperature and also with good corrosion
protection.
62
MAINTENANCE
distilled water as a part of the anti-freeze
solution.
Use tap-water will cause engine damage.
Use a higher concentration of anti-freeze in
freezing weather and be replaced by the
KYMCO dealer. This higher concentration of
antifreeze should not exceed 60%. When
becoming warm, change the anti-freeze ratio
back to the standard ratio.
A concentration of less than 40:60(40%
a n t i - f r e e z e ) w i l l n o t p r o v i d e p r o p e r
corrosion protection.
CAUTION
Use only low-mineral drinking water or

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dink-r150

Table of Contents