Fuse - KYMCO Dink-R125 Manual

Fuse(Dink-R125)
When frequent fuse failures occur, it usually
indicates a short circuit or an overload in the
electrical system.
1.Turn Main switch off, check for blown Fuse.
2.Only replace with a fuse of specified
capacity.
3.Identify the cause of a blown fuse before
replacing it.
Good
WARNING
Never use a fuse with a different rating
from that specified. Serious damage to
the electrical system or a fire may result,
causing a dangerous loss of lights or
engine power.
MAINTENANCE
Fuses list
All functional fuses are located in the fuse
box, there's a sticker on the back of the fuse
box cover. Fuse should be inserted according
to this sticker.
FUSE A (15A): FR/RR turn signal, USB Stop
light, Meter,
FUSE B
light, Light controller.
FUSE C
Blown
Only replace electrical devices (lights,
●
meters) with ones of specified ratings.
If using an inadequate fuse, it may be
●
blown easily or battery loading may
become imbalance.
●
cleaning the scooter.
(25A): Fuel relay, Starter relay, Head
ECU Relay. Horn,
(30A):Charging,
CAUTION
Avoid frontal strong water jet when
,
57