Brake Fluid Level Inspection - KYMCO VISA R 110 Owner's Manual

SECTION 4 - MAINTENANCE

Brake fluid level inspection

With the motorcycle in an upright position, check the front
fluid level. Check the brake fluid level window  on the
master cylinder reservoirs on the handlebars per the
maintenance schedule.

The brake fluid level should be above the lower "L" mark in
the inspection window. If the level is at or below the "L"
mark, check the brake pads for wear.
NOTE - Other checks:
Make sure there are no fluid leaks at any brake system
component. Check for deterioration or cracks at hoses
and fittings.
If your motorcycle requires brake fluid level adjustment
or replacement, contact your KYMCO dealer for service.
Worn brake pads should be replaced immediately. If the
brake pads are not worn, have your KYMCO dealer in-
spect the brake system for fluid leaks. Do not ride your
motorcycle unless the brakes are in perfect working
order.
Brake fluid type: DOT 4
(from a sealed container)
Do not mix brake fluid types, as it may cause brake failure
and could result in an accident. Do not allow brake fluid
to touch the body work, as it will damage its surface.
39