Power Sensor Tour - R&S NRP Series Getting Started

®
R&S NRP Series
4

Power sensor tour

This chapter provides an overview of the available connectors and LEDs of the
power sensor.
In Figure 4-1, the USB power sensor is shown on the left, the LAN power sensor
is shown on the right.
4
3 2
Figure 4-1: R&S NRP series power sensors (example)
1 = RF connector, see
2 = Status LED, see
3 = Host interface connector, see
4 = Trigger I/O connector, see
5 = Network status LED, see
6 = LAN reset button, see
7 = LAN connector, see
8 = Power over Ethernet status LED, see
Getting Started 1419.0170.02 ─ 16
1
8
7
6
5
Chapter 4.1, "RF
Chapter 4.2, "Status
Chapter 4.3, "Host
Chapter 4.4, "Trigger I/O
"Network status LED"
"LAN reset button"
Chapter 4.5, "LAN PoE
4 3 2
connector", on page 28
information", on page 30
interface",
connector",
on page 31
on page 31
interface", on page 31
"Power over Ethernet status LED"
Power sensor tour
1
on page 30
on page 30
on page 31
27