MIMAKI JV33-130 Manual
  1. Manuals
  2. Brands
  3. MIMAKI Manuals
  4. Printer
  5. JV33-130
  6. Manual

MIMAKI JV33-130 Manual

Procedures of fixing ffc
Hide thumbs Also See for JV33-130:
1
2
3

Advertisement

Table of Contents

1. Purpose

This document descibes how to fix four FFC mounted on JV33-130/160 Slider PCB ASSY
to prevent the FFC from breakage

2. Tools to be used

(1) Phillips screwdriver

3. Parts to be used

(1) Sealing material (sponge)
L=110mm (TM-238-15-15)
(2) Double-stick tape 3 pcs
L=30mm (No.532 width: 8.5mm)

4. Operating time

Approx 30 minutes (Including discharge time (15 min) and operation check)

5. Procedures

(1) Turn the main power OFF and pull the power cable out.
Caution: For electrical discharging, be sure to leave the machine more than 15 minutes
afterturning off to pull the FFC out.
(If pulling the FFC out without electricaldischarging, the printhead and the
main PCB may be broken.)
(2) Remove Wiring cover (M508746)
Caution: Handle the cover with care because the cable for optional ventilation unit
Caution: Do not put the screws on the printer
　　　　
Wiring cover (M508746)
JV33-130/160 Procedures of fixing FFC
MIMAKI ENGINEERING CO., LTD.
Sealing
material
Cable clamp
FFC
1/3
Ｄ900675-13
27-Jun-08
Double-
stick tape
Ink tubes
Slider PCB ASSY

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the JV33-130 and is the answer not in the manual?

Questions and answers

Related Manuals for MIMAKI JV33-130

Summary of Contents for MIMAKI JV33-130

  • Page 1 MIMAKI ENGINEERING CO., LTD. 27-Jun-08 JV33-130/160 Procedures of fixing FFC 1. Purpose This document descibes how to fix four FFC mounted on JV33-130/160 Slider PCB ASSY to prevent the FFC from breakage 2. Tools to be used (1) Phillips screwdriver 3.
  • Page 2 Ｄ900675-13 (3) Release the connector lock on the Slider PCB ASSY and remove 4 FFC. Caution1: For electrical discharging, be sure to leave the machine more than 15 minutes afterturning off to pull the FFC out. Caution2: Treat the lock gently because the lock of CN2 is fragile especially. Caution Slider PCB Release the...
  • Page 3 Ｄ900675-13 (5) Put the sealing material to the cable clamp and put the FFC to the connector. Caution1: Put the FFC to the connector without bending or folding. Caution2: Treat the lock gently because the lock of CN2 is fragile especially. 10mm gap Sealing material Caution2...

This manual is also suitable for:

Jv33-160

Table of Contents