Page 2
InkTec Monthly Maintenance Guide Step 1. : Move the Head Carriage Please follow the instruction below to move the head carriage. Step 2. : Cleaning the edge of a head After the head carriage is moved to the left, Coat the cotton bud or cleaing stick with SWA to clean the plate around head.
Page 3
InkTec Monthly Maintenance Guide At ④ step, coat the tissue paper with SWA and clean the front and back of the wiper. * If the wipers are not cleaned regularly the nozzles can't be recovered even after cleaning. At ⑤step, Drop SWA down into the CAP (ⓐ) and wipe it (ⓑ) to clean the CAP (ⓒ). ①...
Page 4
InkTec Monthly Maintenance Guide Step 4. Cleaning the Head Nozzle Coat the superfine fibre cloth (lint free) to clean the nozzles. Wipe every nozzles up and down for ten minutes. * Note : Do not wipe too hard because it can damage The Nozzles Step 5.