Operation With The Central Controller; Softkeys And Status Icons - Julabo DYNEO DD Operating Manual

1.888.610.7664
Product description

5.6.1 Operation with the central controller

The central controller is used to control all menu functions and inputs on the
user interface. Selected menus, softkeys or input fields are highlighted in red.
Turning:
• navigates between menus, buttons and input fields
• sets values
Pressing:
• opens menus
• actuates softkeys and buttons
• activates input fields and selected functions
• confirms an entry

5.6.2 Softkeys and status icons

This section describes the softkeys and status icons found on the operating
interface.
Softkey
24
www.calcert.com
15
10 20
5 25
0 30
Function
The [Start/Stop] softkey starts a temperature control
application or stops an ongoing temperature control
application
The [Home] softkey calls up the Home screen
Go back one menu level with the [Back] softkey
The [Help] softkey calls up the Help menu
The [Save] softkey saves entries
sales@calcert.com