1.888.610.7664
Product description
5.9.3 Thermodynamics menu
The control parameters for the temperature sequence are defined and the pump
capacity is set in the menu <Thermodynamics>.
Adjust controller:
•
Setting for the control parameters for internal or external control
•
Definition of the control behavior
•
Specification of the limit values for heating capacity and cooling capacity
Adjust pump:
•
Setting for pump mode
•
Setting for pump capacity
5.9.4 Adjust safety menu
In the menu <Adjust safety> limit values are set to define a range for safe
process flow.
•
Temperature limits: Setting for the upper and lower warning limits
•
Setpoint limits: Setting for the upper and lower limits for temperature
setpoint
5.9.5 Programmer menu
The <Programmer> menu is used to program temperature sequences, which
can be called up according to definable rules.
•
Timer: Setting for start time, duration and setpoint
•
Profile timer: Timer function for individual profiles
•
Profile series: Planning of individual profile series sequences
•
Edit profile: Create, manage, import and export profiles
5.9.6 Menu Connect unit
The device can be connected with a PC and remote controlled using the USB
interface or the optional RS232 interface. In addition to this, external
programmers can also be connected via optional analog interfaces. In the menu
<Connect unit> parameters for remote control mode can be set.
•
Remote control
•
Digital interfaces
•
External setpoint
•
Analog interfaces
28
www.calcert.com
15
10
20
5
25
0
30
sales@calcert.com