Device Storage; Technical Service - Julabo DYNEO DD Operating Manual

1.888.610.7664
9.7

Device storage

This section describes how to store the device.
 The device is switched off and disconnected from the mains voltage.
1. Empty all system components completely.
2. Clean the device.
3. Carefully dry the device and all its system components, e.g. with
compressed air.
4. Close all connections.
5. Store the device in a dust-free, dry and frost-free location.
 The device is protected and can be safely stored there. It can be put into
operation again as needed.
9.8

Technical Service

If the unit shows faults you cannot resolve, please contact our Technical Service.
Before sending a device to Technical Service, the following points must be
observed:
• Clean and decontaminate the device properly to avoid endangering service
personnel.
• Include a brief description of the fault.
• Package the device safely for shipment.
www.calcert.com
15
10 20
5 25
0 30
Maintenance
79
sales@calcert.com