Alarm Messages - Julabo DYNEO DD Operating Manual

1.888.610.7664
Symbol
5.7

Alarm messages

Errors or disturbances are indicated on the Home screen by alarm messages or
warnings. A help text is displayed by pressing the warning symbol with the
central controller. Important error code descriptions can be found in the
appendix. If you are unable to rectify a fault, contact Technical Service.
Display of alarm message
Alarm:
In the event of an alarm, the tempering process is stopped. The actuators are
switched off. At the same time, a continuous acoustic signal sounds and an
alarm message with a red background is shown on the display. The acoustic
signal can be deactivated by pressing the central controller. The fault causing
the alarm must be remedied. A restart is required.
www.calcert.com
15
10 20
5 25
0 30
Description
Heating is active
Cooling is active
Alarm message
Warning message
Product description
25
sales@calcert.com