Wolf M Series Design Manual page 52

Module Cooktops
Planning Information
IMPORTANT NOTE: Wolf does not recommend the use of
downdraft ventilation with the Steamer or Grill Modules.
A minimum 51 mm is required from the bottom of the
Module to combustible materials.
Refer to the illustrations on the following pages for instal-
lation of Modules.
52 | English
MULTIPLE COOKTOPS
When multiple Modules are installed side by side, refer to
the chart and illustration below for typical configurations.
The cutout dimensions provided will accommodate the
use of an optional filler strip if desired.
COUNTERTOP CUTOUT
(2) 38 cm Modules*
(3) 38 cm Modules*
(4) 38 cm Modules*
(5) 38 cm Modules*
(6) 38 cm Modules*
60 cm Cooktop / 38 cm Module*
76 cm Cooktop / 38 cm Module*
76 cm Cooktop / (2) 38 cm Module*
91 cm Cooktop / 38 cm Module*
*Dimensions apply to ICBCI152TF/S, ICBCG152TF/S, ICBSM15TF/S,
ICBGM15TF/S, and ICBMM15TF/S.
CUTOUT WIDTH
64 mm
MIN
64 mm
MIN
FRONT OF COUNTERTOP
Countertop cutout
737 mm
1118 mm
1505 mm
1886 mm
2267 mm
956 mm
1118 mm
1473 mm
1270 mm
W
495 mm
CUTOUT
DEPTH
W