Wolf M Series Quick Start Manual

M Series Oven Quick Start Guide

Oven Operation

For complete information on the operation and maintenance
of your Wolf product, refer to the use & care guide.
For product information and assistance, touch INFO.
CAUTION
Do not place cookware on the oven floor or use
aluminum foil or other material to line the oven floor or
side walls. Failure to adhere to this notice will damage
the porcelain interior and will void your warranty.
PRIOR TO USE
To ensure all residual oil from the manufacturing process has
been removed, each oven must go through the following
procedure.
Clean oven thoroughly with hot water and a mild deter-
1
gent. Rinse and dry with a soft cloth.
Turn on ventilation. Some smoke and odor is normal.
2
Touch or turn knob to CONVECTION ROAST (ROAST for
3
27" lower oven) and adjust temperature to 550°F for one
hour.
Touch OFF (turn knob for professional model) and allow
4
oven to cool with the door closed.
EXTENDED OPTIONS
Touch SETTINGS to access extended options.
1
Touch or use the slide bar to select the desired option. If
2
more information is needed, touch INFO.
SETTING CLOCK
Touch SETTINGS, then select TIME.
1
Touch 12 HOUR or 24 HOUR mode.
2
Use slide bars to set time of day, select AM or PM, then
3
touch SET. An audible chime indicates clock has been set.
SETTING TIMER
Touch TIMER 1 or TIMER 2.
1
Use slide bars to set duration, then touch SET. An audible
2
chime indicates the timer has been set.
To cancel or edit, touch the countdown time on the
3
display.
Oven will chime and time will flash when complete. Timer
4
will continue to chime until canceled or reset.
SETTING OVEN CONTROLS
Touch QUICK START. Touch or use slide bar to select
1
desired cooking mode. For professional model, turn
selector knob to desired cooking mode.
Touch START to select preset temperature. To change
2
temperature, touch or use slide bar to select desired tem-
perature, then touch START. For professional model, turn
selector knob to adjust temperature.
Touch OFF to end mode. For professional model, turn
3
selector knob to OFF.
SETTING CONTROLS FOR PROOF
Touch QUICK START, then select PROOF. For professional
1
model, turn selector knob to MORE, then select PROOF.
Touch START to select preset temperature. To change
2
temperature, touch or use slide bar to select desired tem-
perature, then touch START. For professional model, turn
selector knob to adjust temperature.
Touch OFF to end mode. For professional model, turn
3
selector knob to OFF.
SETTING CONTROLS FOR TEMPERATURE PROBE
Preheat oven to desired oven temperature in desired mode
1
(bake or stone mode for breads).
Insert probe into the thickest area of food. When making
2
bread, cook for approx 10 minutes before inserting probe.
When preheat is complete, insert probe into probe recep-
3
tacle. Close oven door.
Touch PROBE.
4
Touch SET to select preset temperature. To change tem-
5
perature, use slide bar to select desired temperature, then
touch SET.
An audible chime indicates internal temperature has
6
reached probe set point. Remove and reinsert probe to
verify internal temperature, then select OK or OFF.
SETTING CONTROLS FOR CLEAN
Touch QUICK START, then select CLEAN. For professional
1
model, turn selector knob to MORE, then select CLEAN.
Remove oven racks and rack guides, then touch OK.
2
Touch START.
3
Touch OFF to end mode. For professional model, turn
4
selector knob to OFF.
Oven door will lock and remain locked until the clean cycle
5
has ended and oven temperature has cooled below 550°F.