Wolf M Series Design Manual page 101

Cooktop Ventilation
Planning Information
ELECTRICAL REQUIREMENTS
Installation must comply with all applicable electrical
codes and be properly grounded (earthed).
Locate the electrical supply within the shaded area shown
in the illustration below. Allow a minimum 305 mm electri-
cal cable for connection. A separate circuit servicing only
this appliance is required.
ELECTRICAL REQUIREMENTS
Electrical Supply
Service
E
914 mm 2134 mm
TO BOTTOM EDGE TO COUNTERTOP
Electrical location
Opening Dimensions
CEILING-MOUNTED HOOD
Refer to the chart and illustrations below for opening
dimensions and typical framing. Framing must be able to
support a minimum of 45 kg.
HOOD
91 cm Hood
122 cm Hood
220-240 V AC, 50 Hz
220 V AC, 60 Hz
1.9 A
Opening dimensions
Support framing (typical)
508
mm
314 mm
MIN TO
451 mm
MAX
W
873 mm
1175 mm
W
subzero.com | 101