Connecting Ext3-U-Kit - Kramer EXT3-U-KIT User Manual

Connecting EXT3-U-KIT

Devices that are connected to the
connected.
Only 9600 baud rate is supported for RS-232 communication for both
EXT3-U-R.
To connect EXT3-U-KIT as illustrated in the example in
1. Connect an audio source (for example, a media player) to the AUDIO IN 3.5mm mini
jack on the
1
2. Connect the AUDIO OUT 3.5mm mini jack on the
stereo audio acceptor (for example, speakers).
3. Connect the RS-232 ports:
▪
On the EXT3-U-T, connect the RS-232 3-pin terminal block
controlled device (for example, a media player).
▪
On the EXT3-U-R, connect the RS-232 3-pin terminal block
controller (for example, Kramer
Alternatively, you can connect RS-232 ports the other way around: connect a controlled
device to the
4. Connect the USB type B port
server).
5. Connect the USB type A ports
keyboard and mouse, headphones, a camera, and/or a smartphone).
6. Connect the power adapter to the
EXT3-U-T is powered via LINK RJ-45 ports
EXT3-U-KIT – Connecting EXT3-U-KIT
EXT3-U-R
Figure 3: Connecting to the EXT3-U-KIT
EXT3-U-T front panel.
RC-306
EXT3-U-R RS-232 port and a controller to the
2 on the
11 on the
EXT3-U-R
USB ports are powered/charged while
Figure 3:
EXT3-U-R
10
room controller).
EXT3-U-T to a USB Host (for example a PC
EXT3-U-R to USB devices (for example, a
and then to the mains.
10 .
Kramer Electronics Ltd.
EXT3-U-T and
to an unbalanced
to an RS-232-
7
to an RS-232
15
EXT3-U-T RS-232 port.
7