Scan for full manual
Step 1: Check what's in the box
EXT3-U-T USB Transmitter
1 C-USB/AB-6 cable
Step 2: Get to know your EXT3-U-KIT
EXT3-U-T
#
Feature
1
AUDIO IN 3.5mm Mini Jack
2
USB 2 Type B Port
3
LINK LED
4
ON LED
5
LINK OUT RJ-45 Connector
6
PROG (Tx, Rx)
5-pin Terminal Block Connector
(with common G pin)
7
RS-232 (Rx, Tx)
8
12V DC Power Connector
EXT3-U-R
#
Feature
9
LINK LED
10
AUDIO OUT 3.5mm Mini Jack
11
USB 2 Type A Ports (1 to 4)
12
ON LED
13
LINK IN RJ-45 Connector
14
PROG (Tx, Rx)
5-pin Terminal Block Connector
(with common G pin)
15
RS-232 (Rx, Tx)
16
12V DC Power Connector
EXT3-U-KIT Quick Start
EXT3-U-KIT Quick Start Guide
This guide helps you install and use your
Go to
www.kramerav.com/downloads/EXT3-U-KIT
upgrades are available.
and
EXT3-U-R USB Receiver
EXT3-U-KIT
for the first time.
to download the latest user manual and check if firmware
2 Bracket sets
1 Power adapter and cord
Function
Connect to an unbalanced stereo audio source.
Connect to USB host.
Flashes blue when a link is established.
Lights green when locally powered by the power adapter.
Lights orange when powered by PoC.
Connect to the LINK IN port on the EXT3-U-R.
Connect for firmware upgrade.
Connect for serial extension (9600 baud rate).
Connect to the supplied power adapter.
Function
Flashes blue when a link is established.
Connect to an unbalanced stereo audio acceptor.
Connect to USB devices.
Connect
EXT3-U-T
directly to the power adapter in order to
charge USB devices.
Lights green when locally powered by the power adapter. Lights
orange when powered by PoC.
Connect to the LINK OUT port on the EXT3-U-T.
Connect for firmware upgrade.
Connect for serial extension (9600 baud rate).
Connect to the supplied power adapter.
P/N: 2 9 0 0 - 3 0 1 5 8 8 QS
8 Rubber feet
1 Quick start guide
Rev: 1