Figure 3.148 Administration > Configure & Manage > Snmp > Snmp Mib-2 System; Figure 3.149 Administration > Configure & Manage > Snmp > Options - Advantech EKI-6333AC-4GP User Manual

Item
Privacy Mode
Authentication
Encryption
Privacy Key
Enable
Save
Undo
Back
If required, you can also specify the required information of the MIB-2 System.
Figure 3.148 Administration > Configure & Manage > SNMP > SNMP MIB-2
The following table describes the items in the previous figure.
Item
sysContact
sysLocation
Save
Undo
If you use some particular private MIB, you must fill the enterprise name, number and
OID.
Figure 3.149 Administration > Configure & Manage > SNMP > Options
EKI-6333AC-4GP User Manual
Description
The function is only available when SNMP Version is v3. Specify
the Privacy Mode for this version 3 trap.

noAuthNoPriv: You do not use any authentication types and
encryption protocols.

authNoPriv: You must specify the Authentication and
Password.

authPriv: You must specify the Authentication, Password,
Encryption and Privacy Key.
The function is only available when SNMP Version is v3. When
your Privacy Mode is authNoPriv or authPriv, you must specify
the authentication types for this version 3 trap. Selected the
authentication types MD5/SHA-1 to use.
The function is only available when SNMP Version is v3. When
your Privacy Mode is authPriv, you must specify the encryption
protocols for this version 3 trap.
Selected the encryption protocols DES/AES to use.
The function is only available when SNMP Version is v3. When
your Privacy Mode is authPriv, you must specify the privacy key
(8 ~ 64 characters) for this version 3 trap.
Click Enable checkbox to enable this trap receiver.
Click Save to save the settings. But it does not apply to SNMP
functions. When you return to the SNMP main page. It will show
"Click on save button to apply your changes" remind user to click
main page Save button.
Click Undo to cancel the settings.
Click Back to return the previous screen.
System
Description
Specify the contact information for MIB-2 system.
Value Range: 0 ~ 64 characters.
Specify the location information for MIB-2 system.
Value Range: 0 ~ 64 characters.
Click Save to save the settings.
Click Undo to cancel the settings.
104